Omega Technologies is an authorized distributor of CLECO® Tools

Address: 31125 Via Colinas, Suite 905 Westlake Village, CA 91362 | Phone: 800-888-4005

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive

Price: Price on Request

Part Number: M-14MM45

M-14MM45 Apex 14Mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive. Hex Opening: 14Mm Overall Length: 38.1Mm Diameter Nose End: 20.6Mm Diameter Drive End: 23.8Mm Opening Depth: 11.1Mm

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive Description

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive from Apex Fastener Tools accommodate countersunk or limited clearance nut or bolt locations. Many of these impact sockets have a shouldered body design that can fit in tight quarters. Apex magnetic impact sockets hold the fastener in driving position, even when working straight down. Time-wasting motions are eliminated when starting fasteners or working in hard-to-reach areas. Apex magnetic impact sockets are identified with a M- prefix.

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive from Apex Fastener Tools, formally Cooper Tools, have hex tolerances that are on average 48% tighter than DIN and 35% tighter than ANSI requirements. Apex impact sockets provide an exact, sure fit every time. Impact sockets from Apex Fastener Tools provide the tightest tolerances for straightness and concentricity available.

High strength fasteners in the aviation industry or high performance automotive field often require the use of an impact wrench or impact driver to deliver the amount of torque required to tighten or loosen them. Impact sockets from Apex Fastener Tools are designed and manufactured for high impact use. M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive are made from stronger alloy steel than the average impact socket.

Technical Specifications

Additional information

Socket Type

Magnetic Thin Wall Standard

Hex Opening

14mm

Overall Length

38.1mm

Diameter Nose End

20.6mm

Diameter Drive End

23.8mm

Opening Depth

11.1mm

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive Description

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive from Apex Fastener Tools accommodate countersunk or limited clearance nut or bolt locations. Many of these impact sockets have a shouldered body design that can fit in tight quarters. Apex magnetic impact sockets hold the fastener in driving position, even when working straight down. Time-wasting motions are eliminated when starting fasteners or working in hard-to-reach areas. Apex magnetic impact sockets are identified with a M- prefix.

M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive from Apex Fastener Tools, formally Cooper Tools, have hex tolerances that are on average 48% tighter than DIN and 35% tighter than ANSI requirements. Apex impact sockets provide an exact, sure fit every time. Impact sockets from Apex Fastener Tools provide the tightest tolerances for straightness and concentricity available.

High strength fasteners in the aviation industry or high performance automotive field often require the use of an impact wrench or impact driver to deliver the amount of torque required to tighten or loosen them. Impact sockets from Apex Fastener Tools are designed and manufactured for high impact use. M-14MM45 Apex 14mm Magnetic Thin Wall Metric Standard Socket, 1/2” Square Drive are made from stronger alloy steel than the average impact socket.

Additional information

Socket Type

Magnetic Thin Wall Standard

Hex Opening

14mm

Overall Length

38.1mm

Diameter Nose End

20.6mm

Diameter Drive End

23.8mm

Opening Depth

11.1mm

Related Products

$56.88

$33.08